|
|
|
|
200EXC won't start
|
wackobob
User
| Posts: 62
| Joined: 01/08
Posted: 08/01/08 04:22 PM
|
|
My 200EXC won't start. I fouled a plug so I changed the plug and it still won't start. After I tried starting it, I took the plug out, It doesn't smell of gas. Maybe it isn't getting gas?
|
|
|
|
|
Posted: 08/01/08 04:28 PM
|
|
check if there is spark coming from the plug then try cleaning the carb
===================== ridin the dirt and the pow
|
|
|
|
wackobob
User
| Posts: 62
| Joined: 01/08
Posted: 08/03/08 10:48 AM
|
|
Ok, so I checked to see if it has spark and it doesn't. What are the main things that could br wrong with it?
|
|
|
|
|
|
|
Posted: 08/03/08 12:07 PM
|
|
If when you kick it, it sounds like it's not even trying to start, you might need a new top end. You can determan if you need a top end or not be checking the compression level.
-------------------- 2004 Honda CRF250X
2004 KTM 125EXC
|
|
|
|
wackobob
User
| Posts: 62
| Joined: 01/08
Posted: 08/28/08 01:45 PM
|
|
My EXC 200 starts up, butt if I stall it after riding it for a while it won't start. What could be the problem?
|
|
|
|
|
Posted: 08/28/08 01:56 PM
|
|
hmm like honda said that could be toppend do a compression check
===================== ridin the dirt and the pow
|
|
|
|
|
Posted: 08/28/08 01:59 PM
|
|
or i just learned yesterday from skip that once the bike warms up it requires leaner jetting it may be too rich of a main jet
===================== ridin the dirt and the pow
|
|
|
|
|
Posted: 08/28/08 01:59 PM
|
|
what year is your bike?
===================== ridin the dirt and the pow
|
|
|
|
atkkid250
Addict
| Posts: 2341
| Joined: 07/08
Posted: 08/28/08 02:06 PM
|
|
he says there isnt spark?. your magneto might be full of water. you might have some shorted wires. or your kill switch might be engaged. trace the wires from the switch back to teh engine. making sure there is insulation on all of it and no two bare ends are connecting. and that all plugs are firmyl connected and dry. ~pat
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick
|
|
|
|
|
Posted: 08/28/08 02:08 PM
|
|
wackobob: My EXC 200 starts up, butt if I stall it after riding it for a while it won't start. What could be the problem?
she lights up pat
===================== ridin the dirt and the pow
|
|
|
|
atkkid250
Addict
| Posts: 2341
| Joined: 07/08
Posted: 08/28/08 02:10 PM
|
|
Ok, so I checked to see if it has spark and it doesn't. What are the main things that could br wrong with it?
i copied and pasted that. is post. lol he might have very weak spark. just enough to get it going. it dont hurt to check. but yes. he might have a worn topend as well im just going by what he says. its all we got to go on from a couple thousand miles away haha. ~pat
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick
|
|
|
|
|
Posted: 08/28/08 02:16 PM
|
|
you are right pat so spark check and then compression check is in order
===================== ridin the dirt and the pow
|
|
|
|
atkkid250
Addict
| Posts: 2341
| Joined: 07/08
Posted: 08/28/08 02:25 PM
|
|
lol yes. i think he should get a manual and check everything he can. its allways a good idea and its gotta be done sometime. ~pat
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick
|
|
|
|
Moto40Z
New User
| Posts: 37
| Joined: 04/08
Posted: 08/28/08 02:54 PM
|
|
He also says: My EXC 200 starts up, butt if I stall it after riding it for a while it won't start. What could be the problem? If the bike starts cold, but won't start hot, the cause is usually a bad ignition stator. If the problem was compression it would get better when hot, not worse. Jetting doesn't "go bad," so the cause has to be ignition related. Black boxes just go usually, and they aren't that affected by heat. So I would say stator. Another possibility is fuel starvation. Bad vent on the gas cap, clogged or dirty petcock screen or whatever. The carb fills slowly, so when it sits it will start and run, but eventually the fuel can't keep up, and the bike quits. After it sits the carb fills and starts again. So check to make sure there is fuel coming out of the petcock. If it is, then it is time to change some ignition parts.
|
|
|
|
atkkid250
Addict
| Posts: 2341
| Joined: 07/08
Posted: 08/28/08 03:00 PM
|
|
*** who are you moto? lol i like you. yes. good points. i dont know how he tested the spark. so i cant say how accurate it was. ussualy if it is a spark problem it wont run at all. and if it does it is very spotty. it'll miss some ignitions and stuff. i'd have him clean the carb and check hte fuel. what mix is he running? he says hes got a new plug eh? ~pat
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick
|
|
|
|
|
|
|