Honda Dirt Bikes Forum

this is why the bill was 818$:

brake pads = 42$
rear rotor = 110$
moose tubes front - 25$
moose tube back = 30$
chain 107$
tire - 105$
toal parts = 422$

labour = 4.6 hours @ 74$/hr = 340$

with all that said, the tire I was double harged for, I paid for it a week before and there was comunication problems, they took it off bringing the bill down to 715$.

so from 715$ they also put a chain on. I guess I told them "check the chain, if it needs to be replaced, do it" I knew it needed to be changed, but didnt want to do it quite yet, without that the bill would have been 605$ (getting closer and closer to my original estimate)

from 605$, the labour was a little much, if it was only 200 instead of 350 the bill would have been about 450$, just what I figured right off the bat.

so for a 715$ bill, I gave them 600$ cash and they called it even. not too bad afterall.  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

PICS AT THE BOTTOM OF PAGE 2  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

thank you rm125.

cost me nearly 7000$ for that. its an 05.

I have the original bill of sale, the guy financed it for 12,100$ back in 2005  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

i hope you didnt pay them because that would be your worst move you could do. i already said how long it should take. and 4.6 hours is way over that. it take 2 seconds to put a chain on. and that is no lie, that is all it takes.  
______________________________
Ride 2 strokes, buy 2 strokes, save the 2 stroke.

1998 cr125
2002 cr80

I paid them 600 and probably wont give them the other 105.

I probably should have only given them about 500-550 but oh well, last time I ever go there.  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

just took the bike for a ride, heres pics:

my little brother his this mudhole, he was leaning a little too far forward and the mudhole was about 4 feet deep, he went over the handle bars, the front half of the bike was submerged in mud, perfectly vertical, than the back end fell over to the side. it took 4 guys to pull the bike outta the mud because the mud has such a stron hold on the whole front tire. both radiators were PACKED with mud, as was the whole front tire.




this is his bike after a hour of riding after he got stuck:




all bikes loaded up, ready to go home:

[img=http://img262.imageshack.us/img262/1508/bikesya6.jpg]
[img=http://img262.imageshack.us/img262/1508/bikesya6.c4be430896.jpg]  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

Not looking so new anymore.  
====================

Nobody's gonna hurt anybody. We're gonna be like little Fonzies here. And what's Fonzie like? Come on what's Fonzie like?

tomorrow it will look new again, im going to clean the airfilter and change oils tomorrow too.  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

Looks like a fun place to ride. You Canucks are lucky to have so much land you can ride. Sucks that winter is coming. I used to live in Minnesota and South Dakota, so I know how wicked winter time is. Yall got snowmobiles?  
====================

Nobody's gonna hurt anybody. We're gonna be like little Fonzies here. And what's Fonzie like? Come on what's Fonzie like?

yeah, where we rode today is a ski hill and capming places, its kinda made for "us" (quaders, dirtbikers, big mud bog trucks) its gotta be about 50 x 50 km wide, its in the mountains so its awesome.

yeah we got a ski doo, an old blizzard 600 or 800 or something, it goes pretty damn good. weve never been too big on ski *** I am seriously thinking of getting one this winter, well see how that goes.

and yeah... winter, weve already had a tiny bit of snow, its getting super cold, snows coming soon for good :'(  
--------------------
4 stroke FTW!

05 crf450
DNA rims/hubs
T4 pipe

11 hours on the hour meter, more to come!

Oh! Im so glad you got ripped off!   cory fouillard
Dont feel sorry for this punk kid. I sold him those DNA wheels from MY E-BAY store.(MXWHEELSNET) I even gave him a discount.Then he pays me in canadian dollars. That is less than US dollars. I told him that he needed to add $39 to make it even. Then he tells me that he wont have the $39  for another 2 weeks and that he needed the wheels asap,and if i sent them he would pay.So like a dummy I sent him the wheels.Thinking that he would pay the difference as he promised. Well he didnt pay.When I asked for him to pay up he responded "NNOO"
I told him that he would have Bad Karma and well what do you know he got his in the end, maybe even more to come.We can only hope. this is the kind of guy that would steal your stuff from the back of your truck at a riding spot.  

Man that's pretty harsh. I'm surprised Metal hasn't put you in ur place yet lol!  
1998 KTM 200 EXC
1996 KX250
1993 XR100r
NORTH CENTRAL H.S. FOOTBALL FOR LIFE! GO INDIANS!!!!!

I think he's been put in his place.  

i think hes just not been on. dont come on here trashing people in piblic ehh? dont be a dip do ti through pm. if he wronged you thats yours and hsi business not ours. keep it private. else you'll end up in your place. ~pat  
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick

y did u buy new wheels anyway  
========================================

woods is a beast(had to make him
happy)
having a throttle that keeps sticking open well u simply just cut it off...(not to be taken seriously) eh 2ride?

03 rm125

2stroke eff tee dubba u

the key to having a buttery smooth clutch pull is well..butter of course