Honda Dirt Bikes Forum

Since everyone else around here has done it, ill do a pic-by-pic top end project. Might take me a while cause im so busy, so just keep watching this topic if your interested.

First off, I run 32:1 with Bel-Ray H1R. rejet regularily based on temperatures, cause up here in Canada it can drop about 30 degrees overnight. Ill skip all the other stuff and go right to the start.

Through the exhaust port this is what I could see. One sorta ugly looking piston.



Then I pulled the exhausrt valve cover off and found what I expected. A real mess.





Next ill pull the head and jug off then check it out. Im already pushing around 55-60 hours.

 

Go Maple-G0 Maple  
====================

Nobody's gonna hurt anybody. We're gonna be like little Fonzies here. And what's Fonzie like? Come on what's Fonzie like?

Pay attention Chud!  Given your prediliction to run uber-lean needles, you'll be doing THIS to your bike pretty soon too, my friend  
**

Here we go again!

Thank you. i thought my power valve looked great.  

Ooey-gooey, Maple!  

Shhh... don't tell Woods, but Yamalube 2-R runs much cleaner than that  
**

Here we go again!

LOL. might have to try that next year.  

Skipper:
Pay attention Chud!  Given your prediliction to run uber-lean needles, you'll be doing THIS to your bike pretty soon too, my friend

It's a good thing I use 2R! I expect to find the internals as clean as surgical tools. I have to do the 80 first, it has been on a steady diet of H1R, so I will have my own little comparison.  
====================

Nobody's gonna hurt anybody. We're gonna be like little Fonzies here. And what's Fonzie like? Come on what's Fonzie like?

Way 2 get in there Maple.    Keep us posted.  

Haha you guys are lying to yourselves if you think 2R runs clean. I just had the top end worked on on my bike and it was gunked up. The best thing to do is spend the extra money and use red line.  


Long live 2 strokes!!

allright. little comment and question in one. isn't that "gunk" lubrication? lol its oil! its good for the bike. hahaha. ~pat  
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick

LOL Pat!

My exhaust valve was like that, if not worse! Ha!  
-------------------------------------------------------------
No pain; No gain

it stinks to.  

Nice gouged grungy cuticle there Maple.  
====================

Nobody's gonna hurt anybody. We're gonna be like little Fonzies here. And what's Fonzie like? Come on what's Fonzie like?

lol. confuscious says, go to bed with itchy bum wake up with stinky finger!! ~pat  
PEACE GUYS ITS BEEN A BLAST!!!!! ~patrick

If my bikes had that much crap in there.... your problem is the mix  32 to 1, are you kidding??? I run my 125, 250, and 500 at 50 to 1, using maxma 927, and never have seen a pv cover that mucked up, on a pre mix bike. My tzr, with oil injection, on the other hand, would look like that, after about 5,00 miles. Lean that puppy up, and you can jet your bike soooo much better